Audi A3/S3 Installation manual ready
Due some customers requested some help for install PolarFIS Advanced in Audi vehicles, we added a little manual with some instructions and screenshots for this purpose. This manual is for Audi A3 S3 RS3 8P and for left hand drive models.
In case you have one right hand drive model, and desire to help us to prepare it, please contact with us at support@auto-polar.com, we will appreciate your help 🙂
Audi Installation manual (English) Â Â download
Audi Installation manual (Spanish) Â Â download
Thanks in advance for your attention,
Regards!
Check this link 🙂
http://www.vwwatercooled.com.au/forums/f78/auto-polar-fis-advanced-complete-guide-80439.html#post892569
Hello, how to we install this for a right hand drive MK6 Golf R?? It seems the gateway is not where the left hand drive car is
Hello J. Denis,
Exists 3 main reasons for this :
A) Some parameters are only available for diesel engines and others for gasoline engines. So, have in mind that is possible you not will see all parameters available in your vehicle (all depends on your engine type).
B) Your ECU not support all parameters. Some ECUs not give the values of some parameters and this is the reason why we not show on your cluster (FIS display)
C) For last, another possibility is that you not have some “sensors” and obviously PolarFIS not will read it (for example oil sensor). In this case, the value will be shown at zero (0).
If you desire, give us details of your ENGINE ECU and we will verify 100% that this is the issue.
Regards!
Hi.
Can you please contact us at info@auto-polar.com to receive support with your issue?
Thanks and best regards.
I use Polar Fis on my Audi S3 8P but unfortunately the AFR and turbo pressure doesn’t displays.